Heide 213 Classroom
Capacity:
40Technology Level:
3Hardware or Capabilities:
Image of the Room:
Classroom Equipment Support
For assistance or to report problems with desk equipment please contact one of the following people in the order listed.
Between 8:00am - 5:00 pm
- Technology Support Center Helpdesk -- x4357
- AV support (non-emergency only) -- av@uww.edu
Between 5:00 pm - 8:30 pm
- Evening Classroom Support -- x5794
Please always provide as much detail as possible as to the nature of the problem you are experiencing.
Classroom Hardware
Sony VHS DVD Combo Player
Description
The Sony VHS and DVD combo players allows you to play either a VHS or DVD.
To use the VHS player follow these instructions:
1. Turn on the player by pressing the Power button
2. Insert the tape into the VHS slot.
2. Press the play button to start tape.
To use the DVD player follow these instructions:
1. Turn on the player by pressing the Power button
2. Press the Eject button on the DVD Player.
3. Insert the DVD you wish to view
4. Press the Play button to start playing the DVD
Tips
NEC MT1065
TEAC 370 Receiver
Description
Classrooms equipped with this receiver allows the sound from the PC, VCR to be played through the high powered speakers in the room.
1. If you are going to be using the VCR be sure to select the button labeled VCR.
2. If you are going to be using the PC be sure to select the button labeled PC.
Tips
Classroom Switchbox
Description
The switch box in this room is used to switch between the document camera [DOC CAM], computer [DESK PC] and laptop [EXT PC].
The three different option available on the switch box are:
Desk PC: Select this source to project the PC.
Doc Cam: Select this source to project the Document Camera
Ext PC: Select this source if you use a laptop in the classroom
Tips
Samsung 900DXR Doc Camera
Description
To use the Document Camera follow these instructions:
1. Turn Computer On.
2. Turn Projector On.
3. Turn Document Camera on by pressing the GREEN power button.
4. Press "LAMP" on the Document camera to turn on the side lamps. Press "LAMP" a second time to turn on the base lamp for transparencies. Press "LAMP" one more time to turn all lamps off.



